1.25mm pitch Wire To Board Connectors customized

1.25mm Pitch Wire To Board Connectors

Wire to board Connectors are essential components in electronic devices that facilitate the connection between wires and circuit boards. These connectors allow for the easy and secure transfer of electrical signals and power between two connected components.

One type of wire to board connector is the 1.25mm pitch connector. This refers to the distance between the center of two adjacent pins or contacts on the connector. A smaller pitch size generally means a higher density of pins, allowing for more connections in a limited space.

The 1.25mm pitch wire to board connectors are commonly used in applications that require compact and reliable connections. These connectors are often found in mobile phones, tablets, laptops, digital cameras, and other small electronic devices. Their small size and high pin density make them ideal for use in densely populated circuit boards.

The connectors consist of two main components - the housing and the contacts. The housing is usually made of high-quality plastic or metal and is designed to hold the contacts in place. The contacts, on the other hand, are typically made of copper alloy and are responsible for carrying the electrical signals and power between the wire and the board.

There are several types of contacts used in 1.25mm pitch wire to board connectors, including surface mount technology (SMT) contacts, through-hole technology (THT) contacts, and insulation displacement technology (IDT) contacts. SMT contacts are soldered directly onto the surface of the circuit board, while THT contacts are inserted through holes in the board and soldered on the opposite side. IDT contacts, on the other hand, use blades or forks to pierce the insulation of the wire and make direct contact with the conductor.